Vizio Universal Remote Codes & Program Steps

Vizio Universal Remote Codes

If you have just purchased an universal remote and require the Vizio TV Universal Remote codes. The codes are described in this article. There are many code codes for remotes that work with Vizio that are listed below. We’ve provided multiple codes to each device. If one of these codes doesn’t work, you can try another one. The code is typically 4 digits in length.

Vizio is among the most well-known TV brands on the market. Most of the time, a VIZIO TV comes with remote control. If, however, for some reason you lose your Vizio TV remote or has been damaged, you could utilize a universal remote control to control the TV. It is essential to understand how to program your universal remote control so that it can be compatible with Vizio TV before you can apply the code. The steps to program a Vizio TV with the Universal Remote Control has been described in the second section in this post.

Vizio Universal Remote 5 Digit Codes

  • 10178
  • 10120
  • 10864
  • 10117
  • 10885
  • 11756
  • 01377

Vizio Universal Remote 3 Digit Codes

  • 502
  • 505
  • 627
  • 004
  • 113
  • 011

Vizio Universal Remote 4 Digit Codes

1758, 1292, 0117, 1004, 1017, 1078, 0205, 0030, 0128, 0056, 0178, 1756

Vizio Audio Universal Remote Codes

0600, 0883

Vizio DVD Universal Remote Codes

1500, 1502, 1501, 1419, 0382

Vizio Wall Mount Universal Remote Codes


How to program One Universal Remote for All Without Coding

With the auto-search method, all one for all universal codes go through a scanning process within the remote. It scans a single code at a time in order to identify the correct remote code that will work with your remote to set up the remote control. Follow the steps below:

  1. “Switch on” the smart device such as “TV” that you’d like to use as a universal remote with.
  2. “Turn on” the remote, press the button for the device (TV DVD, CBL, OK/SEL) for 3 seconds. The LED light will indicate that the device is prepared to be programmed.
  3. Point out the remote to the device and then click on “CH+” & “CH+” switches. Remote will show off and on signals. Press the “up” or “down” key repeatedly until the device will be turned off.
  4.  Check the code by pressing on the “power” key. The device will be turned on. If it starts, try to change the channel to confirm that the remote has been properly programmed.  
  5. Tap then the “device” button to save the code. The LED on the device will flash twice to confirm the code saved.

How to program One for all Universal Remote Manual Method

Utilizing the keycode, you can easily create a universal remote, and the keycode will identify the manufacturer and model of your device.

  • You must first “Turn the device on”
  •  Click “TV” on your  “One For All universal remote”  
  •  Then press while holding on the “Setup button” of the Universal Remote until it displays “Light Flash” (It show it’s”Learning mode”)
  • Enter your “Keycode” which you gathered from the above table.
  • After you’ve completed the procedure, just “point the remote towards the television” and then “Press and Hold the Power” button.
  • You can release the “Power Button” whenever the screen is turned off.

This is it, your television will now function perfectly using this universal remote. In case your device isn’t working, try repeating the same process using the different code that is in the same area of the table referenced.

How to program One for all universal remotes with the Code Search

If you are unable to locate the code that works on the device at the moment, you can change your universal remote in search mode to find the right one. This is a manual code that forces the remote to enter the search mode.

  • First , “Turn The Device On”
  •  Then press then hold “Setup” button  
  • You must enter into the “9-9-1” (three digit) code.
  •  Then hold down the “Power Button” on the remote. Then press the Channel up until your TV “Turns off”  

The above procedure may require long time, however it is crucial to identify your code. After you’ve completed the above steps, your remote should function perfectly.


We hope this article on Vizio Universal Remote Codes and program instructions has been helpful. If you need any additional assistance, please feel free to reach out to us in the comments section below. We’ll be happy to help however we can. Thanks for reading!

Leave a Comment