GE Universal Remote Codes For Insignia TV and Setup Instructions

GE Universal Remote Codes For Insignia TV

Do you have an Insignia TV and are in need of the GE universal remote codes? All things are covered here. By using the information in this post, you should be able to set up your universal remote to work with your device. The GE remote codes and programming instructions for the universal remote to device are included in the article.

In addition, before you start programming a remote, you should look over the GE universal remote codes.

What are GE Universal Remote Codes Insignia TV?

Like other modern TVs, Insignia Smart TVs include either a universal remote or an Insignia-branded universal remote. Programming the TV with a different brand of remote requires the GE Remote Codes for Insignia TV.

You can use a three, four, or five-digit GE Universal Remote Code with your Insignia TV. In addition, a three-digit code is the standard. Adding a zero to the beginning of a GE Universal remote code is necessary because some Insignia televisions may not recognise codes with only three digits.

GE Universal Remote Control Codes For INSIGNIA TVs

  • 0135
  • 0103
  • 0029
  • 1180
  • 1171
  • 0905
  • 1148
  • 0116
  • 1408
  • 1406
  • 0189
  • 1181
  • 0167
  • 0217
  • 1407
  • 0456

Why are GE remote codes needed for Insignia TV?

Using the remote, you can make changes to the volume, TV channels, track number, etc. A Remote-Control device is typically brand- and model-specific. Universal remote controls can mimic the functions of products from a wide variety of manufacturers. To make a Universal remote compatible to a specific device like TV, we need to program remote to device. Universal remote codes help in it. In this guide, we have used GE universal remote codes for Insignia TV.

How to program a GE universal remote to Insignia TV

In this section, we are sharing process to program a GE universal remote to the Insignia TV. It should take few seconds to pair up both remote and Insignia TV.

  • Turn on Your TV.
  • Hold down the Setup button on the remote control until a RED light appears.
  • Press and release the “TV” button
  • Next, enter the GE remote codes for Insignia TV.
  • When the code is entered correctly, the RED light will go off.
  • Now, point the remote at your TV and try pressing all of its buttons. If you can see that it responds to each button press, then you have paired successfully!

If some of the keys on your GE remote are not working with the Insignia TV, then you have to re-program remote to the TV with other code from the list.

Conclusion:

Your work here is done. You can now control your Insignia TV with the GE remote, thanks to these universal codes. If your device doesn’t work with first GE remote codes for Insignia TV listed in the table above, you can try with another code from the list.

Also Read:

Leave a Comment