This site is owned by the universal remote codes. In this particular article we will offer all codes for TCL TVs. If you’re using this TCL TV at home or in the office or anywhere else anywhere in the world, then this article will get you the option of not interrupting the remote on your TCL television.
We have included different codes from the list, you can test them using the following methods, either the one method or two options. If you are not sure, then use the following list and set up your remote using the methods below.
How to program One Universal Remote for All Without Coding
With the auto-search method, all one for all universal codes go through a scanning process within the remote. It scans a single code at a time in order to identify the correct remote code that will work with your remote to set up the remote control. Follow the steps below:
“Switch on” the smart device such as “TV” that you’d like to use as a universal remote with.
“Turn on” the remote, press the button for the device (TV DVD, CBL, OK/SEL) for 3 seconds. The LED light will indicate that the device is prepared to be programmed.
Point out the remote to the device and then click on “CH+” & “CH+” switches. Remote will show off and on signals. Press the “up” or “down” key repeatedly until the device will be turned off.
Check the code by pressing on the “power” key. The device will be turned on. If it starts, try to change the channel to confirm that the remote has been properly programmed.
Tap then the “device” button to save the code. The LED on the device will flash twice to confirm the code saved.
How to program One for allUniversal Remote Manual Method
Utilizing the keycode, you can easily create a universal remote, and the keycode will identify the manufacturer and model of your device.
You must first “Turn the device on”
Click “TV” on your “One For All universal remote”
Then press while holding on the “Setup button” of the Universal Remote until it displays “Light Flash” (It show it’s”Learning mode”)
Enter your “Keycode” which you gathered from the above table.
After you’ve completed the procedure, just “point the remote towards the television” and then “Press and Hold the Power” button.
You can release the “Power Button” whenever the screen is turned off.
This is it, your television will now function perfectly using this universal remote. In case your device isn’t working, try repeating the same process using the different code that is in the same area of the table referenced.
How to program One for all universal remotes withthe Code Search
If you are unable to locate the code that works on the device at the moment, you can change your universal remote in search mode to find the right one. This is a manual code that forces the remote to enter the search mode.
First , “Turn The Device On”
Then press then hold “Setup” button
You must enter into the “9-9-1” (three digit) code.
Then hold down the “Power Button” on the remote. Then press the Channel up until your TV “Turns off”
The above procedure may require long time, however it is crucial to identify your code. After you’ve completed the above steps, your remote should function perfectly.
Conclusion:
If you’re looking for a TCL TV universal remote code, we hope this article has been helpful. We’ve listed the codes and instructions for programming your TCL TV remote control so that you can get started using it right away. With these codes, you’ll be able to program your remote control with ease. If you have any questions or need help finding the right code for your TV, feel free to leave us a comment below and we’ll be happy to assist.
