This blog post discusses the codes for sanyo television and if you’re using a Sanyo TV, then you’ll find all kinds of remote codes on the given list. You can program your device using your preferred remote, regardless of the manufacturer you are using. But generally 049 codes work with Sanyo televisions. If this isn’t working, try the following universal codes.
In the beginning, we are going to give you the plethora of universal Sanyo remote codes in this list. Then, you can utilize any of the below three ways to program your universal remote to Sanyo TV.
Sanyo Universal Remote 4 Digit Codes
0049, 0097, 0110, 0004, 0268, 0012, 0108, 0180
Sanyo Tv Universal Remote 3 Digit Codes
054, 069, 023, 025, 004, 013, 049, 108, 110, 180, 209
RCA Universal Remote Codes For Sanyo
1004 , 1048 , 1049 , 1073 , 1080 , 1107 , 1162 , 1169 , 1180 , 1196
Philips Universal Remote Codes For Sanyo
0506, 0311, 0612, 0002, 0428, 0802, 0412, 0619
Magnavox Universal Remote Codes For Sanyo TV
0035, 0039
Sanyo TV Universal Codes for Sony Remote
330, 335
Sanyo TV Universal Codes for Comcast xfinity remote
10154, 10159
Sanyo TV Universal Codes for Cox remote
0054, 0154, 0088, 0799, 1142
SANYO TV Universal Codes for One for All Remote & GE
0049, 0097, 0110, 0004, 0268, 0012, 0108, 0180
Related Post: GE Universal Remote Codes
SANYO TV Codes for DirecTV Remote
10154, 10088, 10107, 10146, 10159, 10232, 10484, 10799, 10893, 11142, 10208, 10339
How to program One Universal Remote for All Without Coding
With the auto-search method, all one for all universal codes go through a scanning process within the remote. It scans a single code at a time in order to identify the correct remote code that will work with your remote to set up the remote control. Follow the steps below:
- “Switch on” the smart device such as “TV” that you’d like to use as a universal remote with.
- “Turn on” the remote, press the button for the device (TV DVD, CBL, OK/SEL) for 3 seconds. The LED light will indicate that the device is prepared to be programmed.
- Point out the remote to the device and then click on “CH+” & “CH+” switches. Remote will show off and on signals. Press the “up” or “down” key repeatedly until the device will be turned off.
- Check the code by pressing on the “power” key. The device will be turned on. If it starts, try to change the channel to confirm that the remote has been properly programmed.
- Tap then the “device” button to save the code. The LED on the device will flash twice to confirm the code saved.
How to program One for all Universal Remote Manual Method
Utilizing the keycode, you can easily create a universal remote, and the keycode will identify the manufacturer and model of your device.
- You must first “Turn the device on”
- Click “TV” on your “One For All universal remote”
- Then press while holding on the “Setup button” of the Universal Remote until it displays “Light Flash” (It show it’s”Learning mode”)
- Enter your “Keycode” which you gathered from the above table.
- After you’ve completed the procedure, just “point the remote towards the television” and then “Press and Hold the Power” button.
- You can release the “Power Button” whenever the screen is turned off.
This is it, your television will now function perfectly using this universal remote. In case your device isn’t working, try repeating the same process using the different code that is in the same area of the table referenced.
How to program One for all universal remotes with the Code Search
If you are unable to locate the code that works on the device at the moment, you can change your universal remote in search mode to find the right one. This is a manual code that forces the remote to enter the search mode.
- First , “Turn The Device On”
- Then press then hold “Setup” button
- You must enter into the “9-9-1” (three digit) code.
- Then hold down the “Power Button” on the remote. Then press the Channel up until your TV “Turns off”
The above procedure may require long time, however it is crucial to identify your code. After you’ve completed the above steps, your remote should function perfectly.
Conclusion:
We hope this article on Sanyo universal remote codes and program instructions has been helpful. If you need any additional assistance, please feel free to reach out to us in the comments section below. We’ll be happy to help however we can. Thanks for reading!