Sansui TV’s Universal Remote Codes & Program Instructions

Sansui TV’s Universal Remote Codes & Program Instructions

Many Sansui TV users prefer to use universal remote controls, and these remotes come with a variety of codes, including 3-digit and 4-digit codes for Sansui TVs.

If you’re looking for universal remote codes, this blog will provide you with a variety of codes as well as instructions on how to programme your Sansui TV remote to work with your desired universal remote.

We’ll start with all of the codes and then move on to the programming method. You can keep trying different codes until your TV remote is successfully programmed. Let’s get started…

Sansui TV’s Universal Remote 4 Digit Codes List

0310, 1052, 0394, 5006, 6071, 0888, 0264, 1337, 1208, 0698, 1556, 0135, 1230, 0171, 6061, 5441, 5871, 1107, 0806, 2832, 1267, 5010

Sansui TV’s Universal Remote 5 Digit Codes List

20695, 12258, 11670, 10173, 13559, 11904, 11892, 10463, 11938, 13520, 12282, 13700, 11938, 13700

Sansui TV’s Universal Remote 3 Digit Codes List

834, 030, 060, 908, 748, 227, 011, 527, 750, 985, 310, 171, 865, 208, 029, 211, 055

RCA Universal Remote Codes For Sansui TV

  • 1191
  • 1208
  • 1282
  • 1284
  • 1290

GE & One-For-All Universal Remote Codes For Sansui TV

  • 0135
  • 0310

Philips Universal Remote Codes For Sansui TV

  • 0115
  • 0632

Sansui TV Remote Codes Comcast

10463, 11409, 11904, 11911, 11935, 12258, 12282, 0463, 10171, 10165, 10173, 11670, 11892, 11929

Sansui TV Remote Codes Dish Network

899, 748, 211, 918, 420, 721, 621, 898, 726, 1409, 1935, 730, 276, 123, 250, 985, 622, 3377, 908, 1463, 526, 858, 041, 767, 500, 569, 720, 138, 1670, 1892, 227, 527, 374, 522, 756, 509, 672, 865, 866, 733, 000, 754, 533, 854, 694, 171, 3564, 265, 0463, 841, 001, 752, 0171, 846, 853, 089, 505, 834, 212, 750

How To Program Sansui TV Universal Remote?

To program a Sansui TV with a universal remote, there are several methods available. Below is the official method, as well as some common methods such as keycode, manual setup, and programming via Sansui remote code.

How to use a dish network remote control to use a Sansui TV (Official Method)

  1. Point the Dish Network remote towards the TV.
  2. Press and hold the “TV button” at the top of the remote until all four lights turn on.
  3. Press the “Red Power Button” at the top of the remote.
  4. Press and hold the “Channel +” button until the TV turns off.
  5. Press the “Pound Button“.
  6. Press the “Big Red Power Button” 3 to 5 times.

If the official method does not work, you can also try using keycode, manual setup, or other methods.

How to Program Sansui TV’s Universal Remote Without Codes

To program your universal remote using the auto search method, follow these steps:

  1. Turn on the Device you want to control with the remote (e.g., TV, DVD player, cable box).
  2. Press and hold the device button (TV, DVD, CBL and OK/SEL) on the remote for 3 seconds, until the LED light turns on. This indicates that the remote is ready to be programmed.
  3. Point the remote at the device and press the “CH+” and “CH-” buttons. The remote should send out on/off signals.
  4. Press the “up” or “down” button repeatedly until the device turns off.
  5. Press the “power” button to verify that the code is correct. The device should turn on. If it does, try changing the channel to make sure the remote is programmed correctly.
  6. Press the Device button again to save the code. The LED light on the device should blink twice to confirm that the code has been stored.

How to Program Sansui TV’s Universal Remote With Manual Method

To program a universal remote using a keycode, follow these steps:

  1. Turn on the device you want to control (e.g., TV, DVD player, cable box).
  2. Press the “TV” button on your Dish Network universal remote.
  3. Press and hold the “Setup” button on the remote until the light flashes. This indicates that the remote is in learning mode.
  4. Enter the keycode for your device, which you can find in the instructions booklet or programming guide.
  5. Point the remote at the device and press and hold the “Power” button.
  6. Release the “Power” button when the screen turns off.

Your device should now be programmed to work with the universal remote control. If it doesn’t work, try repeating the steps with a different code from the reference table. I hope this helps! Let me know if you have any other questions.

How to Program Sansui TV’s Universal Remote With Code Search

To program your universal remote using the code search method, follow these steps:

  1. Turn on the device you want to control (e.g., TV, DVD player, cable box).
  2. Press and hold the “Setup” button on the remote until the light flashes.
  3. Enter the code “9-9-1” using the number buttons on the remote.
  4. Press and hold the “Power” button on the remote, and then press the “Channel Up” button repeatedly until the device turns off.
  5. Release the “Power” button. Your remote should now be programmed and should work for all functions.

This method may take some time, but it is a reliable way to find the correct code for your device. Once you’ve found the correct code, you can use it to program your Sansui TV’s Universal Remote and control your devices. I hope this helps! Let me know if you have any other questions.

Leave a Comment