Looking for the right codes to use with your Proscan TV and its universal remote control? You’re in the right place! In this guide, we have compiled a comprehensive list of codes for various types of Proscan TV remote control, including 3-digit, 4-digit, and 5-digit codes.
We’ve even included codes for using a GE universal remote with your Proscan TV. Simply reference the table below to find the codes you need, and then follow the provided instructions to program your remote and start enjoying seamless control of your TV and other audio/video devices. Let’s get started!
Proscan HDTV Universal Codes = 1000
Proscan TV Universal Codes = 1000, 1008, 1068, 1094, 1108
Proscan DVD Universal Codes = 2118, 2144, 2205, 2319
Proscan VCR Universal Codes = 3000
GE & One-For-All Universal Remote Codes For Proscan TV = 0163, 0162, 0031, 0000, 0107, 0015
Philips Universal Remote Codes For Proscan TV = 0704, 0312, 0103, 0601, 0817, 0917
RCA Universal Remote Codes For Proscan TV = 1000 , 1100 , 1181 , 1203 , 1212 , 1233
How to Program Proscan TV’s Universal Remote Without Codes
To program your universal remote using the auto search method, follow these steps:
Turn on the Device you want to control with the remote (e.g., TV, DVD player, cable box).
Press and hold the device button (TV, DVD, CBL and OK/SEL) on the remote for 3 seconds, until the LED light turns on. This indicates that the remote is ready to be programmed.
Point the remote at the device and press the “CH+” and “CH-” buttons. The remote should send out on/off signals.
Press the “up” or “down” button repeatedly until the device turns off.
Press the “power” button to verify that the code is correct. The device should turn on. If it does, try changing the channel to make sure the remote is programmed correctly.
Press the Device button again to save the code. The LED light on the device should blink twice to confirm that the code has been stored.
How to Program Proscan TV’s Universal Remote With Manual Method
To program a universal remote using a keycode, follow these steps:
Turn on the device you want to control (e.g., TV, DVD player, cable box).
Press the “TV” button on your Proscan TV universal remote.
Press and hold the “Setup” button on the remote until the light flashes. This indicates that the remote is in learning mode.
Enter the keycode for your device, which you can find in the instructions booklet or programming guide.
Point the remote at the device and press and hold the “Power” button.
Release the “Power” button when the screen turns off.
Your device should now be programmed to work with the universal remote control. If it doesn’t work, try repeating the steps with a different code from the reference table. I hope this helps! Let me know if you have any other questions.
How to Program Proscan TV’s Universal Remote With Code Search
To program your universal remote using the code search method, follow these steps:
Turn on the device you want to control (e.g., TV, DVD player, cable box).
Press and hold the “Setup” button on the remote until the light flashes.
Enter the code “9-9-1” using the number buttons on the remote.
Press and hold the “Power” button on the remote, and then press the “Channel Up” button repeatedly until the device turns off.
Release the “Power” button. Your remote should now be programmed and should work for all functions.
This method may take some time, but it is a reliable way to find the correct code for your device. Once you’ve found the correct code, you can use it to program your Proscan TV’s universal remote and control your devices. I hope this helps! Let me know if you have any other questions.
