Polaroid TV Universal Remote Codes & Program Instructions

Polaroid TV Universal Remote Codes

Are you having trouble programming your Polaroid TV universal remote control? If this is the case, you are not alone. Many people struggle to program their universal remotes, especially if they have misplaced the manual or the remote is not the original one that came with their TV.

In this blog post, we will go over how to program your Polaroid TV universal remote in detail, including a list of Polaroid TV universal remote codes and step-by-step instructions. This post will provide you with the information you need to get your remote up and running smoothly, whether you’re trying to set up a new one or simply replacing an old one.

Polaroid TV Universal Remote 4 Digit Codes

  • 1480
  • 0765
  • 0150
  • 1276
  • 1991
  • 1523
  • 0775
  • 0865
  • 0178
  • 1004

Polaroid TV Universal Remote 5 Digit Codes

11523, 11276, 10865, 11316, 11262, 11326, 11341, 11991, 11126, 11328, 10765, 11498, 11992, 11314, 11327

Polaroid TV Universal Remote 3 Digit Codes

  • 678

Polaroid TV Remote Codes For Comcast

10765, 12063, 12002, 11991, 11962, 11769, 11767, 11766, 11762, 11687, 11565, 11538, 11523, 11385, 11341, 11328, 11327, 11326, 11316, 11314, 11286, 11276, 11262, 10865, 12267, 12120, 12117

VIZIO Universal Remote Codes For Polaroid TV

0004, 0130, 0005, 0138, 0009

RCA Universal Remote Codes For Polaroid TV

  • 1434
  • 1426

GE & One-For-All Universal Remote Codes For Polaroid TV

  • 0182
  • 0173
  • 0133

Philips Universal Remote Codes For Polaroid TV

  • 0819
  • 0918
  • 0914

Use the below method to program universal remotes to work with your Polaroid TV:
1 – Hold the setup button until the light stays red or green.
2 – Be sure the light stays illuminated.
3 – Enter one of the TV remote codes provided above.

How to Program Polaroid TV Universal Remote Without Codes

To program your universal remote using the auto search method, follow these steps:

  1. Turn on the Device you want to control with the remote (e.g., TV, DVD player, cable box).
  2. Press and hold the device button (TV, DVD, CBL and OK/SEL) on the remote for 3 seconds, until the LED light turns on. This indicates that the remote is ready to be programmed.
  3. Point the remote at the device and press the “CH+” and “CH-” buttons. The remote should send out on/off signals.
  4. Press the “up” or “down” button repeatedly until the device turns off.
  5. Press the “power” button to verify that the code is correct. The device should turn on. If it does, try changing the channel to make sure the remote is programmed correctly.
  6. Press the Device button again to save the code. The LED light on the device should blink twice to confirm that the code has been stored.

How to Program Polaroid TV Universal Remote With Manual Method

To program a universal remote using a keycode, follow these steps:

  1. Turn on the device you want to control (e.g., TV, DVD player, cable box).
  2. Press the “TV” button on your Dish Network universal remote.
  3. Press and hold the “Setup” button on the remote until the light flashes. This indicates that the remote is in learning mode.
  4. Enter the keycode for your device, which you can find in the instructions booklet or programming guide.
  5. Point the remote at the device and press and hold the “Power” button.
  6. Release the “Power” button when the screen turns off.

Your device should now be programmed to work with the universal remote control. If it doesn’t work, try repeating the steps with a different code from the reference table. I hope this helps! Let me know if you have any other questions.

How to Program Polaroid TV Universal Remote With Code Search

To program your universal remote using the code search method, follow these steps:

  1. Turn on the device you want to control (e.g., TV, DVD player, cable box).
  2. Press and hold the “Setup” button on the remote until the light flashes.
  3. Enter the code “9-9-1” using the number buttons on the remote.
  4. Press and hold the “Power” button on the remote, and then press the “Channel Up” button repeatedly until the device turns off.
  5. Release the “Power” button. Your remote should now be programmed and should work for all functions.

This method may take some time, but it is a reliable way to find the correct code for your device. Once you’ve found the correct code, you can use it to program your Polaroid TV Blu-Ray universal remote and control your devices. I hope this helps! Let me know if you have any other questions.

Leave a Comment