Philips Blu-Ray Universal Remote Codes & Program Instructions

Philips Blu-Ray Universal Remote Codes & Program Instructions

Are you tired of juggling multiple remote controls for your home entertainment system? Look no further than the Philips Blu-Ray Universal Remote. With the ability to control multiple devices, including your Blu-Ray player, television, and sound system, the Philips Blu-Ray Universal Remote offers convenience and simplicity in one compact design. In this blog post, we will provide you with the codes and program instructions you need to get your universal remote up and running in no time.

These codes are valid for Smart Network WI-FI ready models and Philips 4K Upscaling 2D/3D Blu-Ray Disc & Streaming Players, so check them out below. If any of the codes do not work for your remote, try different codes.

Philips Blu-Ray Universal 5 Digit Remote Codes

  • 22506
  • 21276
  • 21506
  • 21340
  • 20503
  • 22084
  • 20675
  • 21158
  • 20646
  • 21354
  • 22434
  • 20539

Philips Blu-Ray Universal 4 Digit Remote Codes

  • 0731
  • 0825
  • 0666

GE Universal Remote Codes For Philips Blu Ray Player

  • 0666
  • 0731
  • 0825

RCA Universal Remote Codes For Philips Blu Ray Player

3162, 3258, 3356, 3383, 3389, 3479, 3480, 3483, 3484, 3486, 3488, 3489, 3490, 3491, 3497, 3498, 3504, 3531, 3607, 3612

How to Program Philips Blu-Ray Universal Remote Without Codes

To program your universal remote using the auto search method, follow these steps:

  1. Turn on the device you want to control with the remote (e.g., TV, DVD player, cable box).
  2. Press and hold the device button (TV, DVD, CBL and OK/SEL) on the remote for 3 seconds, until the LED light turns on. This indicates that the remote is ready to be programmed.
  3. Point the remote at the device and press the “CH+” and “CH-” buttons. The remote should send out on/off signals.
  4. Press the “up” or “down” button repeatedly until the device turns off.
  5. Press the “power” button to verify that the code is correct. The device should turn on. If it does, try changing the channel to make sure the remote is programmed correctly.
  6. Press the Device button again to save the code. The LED light on the device should blink twice to confirm that the code has been stored.

How to Program Philips Blu-Ray Universal Remote With Manual Method

To program a universal remote using a keycode, follow these steps:

  1. Turn on the device you want to control (e.g., TV, DVD player, cable box).
  2. Press the “TV” button on your Dish Network universal remote.
  3. Press and hold the “Setup” button on the remote until the light flashes. This indicates that the remote is in learning mode.
  4. Enter the keycode for your device, which you can find in the instructions booklet or programming guide.
  5. Point the remote at the device and press and hold the “Power” button.
  6. Release the “Power” button when the screen turns off.

Your device should now be programmed to work with the universal remote control. If it doesn’t work, try repeating the steps with a different code from the reference table. I hope this helps! Let me know if you have any other questions.

How to Program Philips Blu-Ray Universal Remote With Code Search

To program your universal remote using the code search method, follow these steps:

  1. Turn on the device you want to control (e.g., TV, DVD player, cable box).
  2. Press and hold the “Setup” button on the remote until the light flashes.
  3. Enter the code “9-9-1” using the number buttons on the remote.
  4. Press and hold the “Power” button on the remote, and then press the “Channel Up” button repeatedly until the device turns off.
  5. Release the “Power” button. Your remote should now be programmed and should work for all functions.

This method may take some time, but it is a reliable way to find the correct code for your device. Once you’ve found the correct code, you can use it to program your Philips Blu-Ray universal remote and control your devices. I hope this helps! Let me know if you have any other questions.

Conclusion:

In conclusion, the Philips Blu-Ray Universal Remote is a versatile and user-friendly remote control that allows you to easily control all of your Blu-Ray and other devices with just one device. With its compatibility with almost all major brands and models, the Philips Blu-Ray Universal Remote is an excellent choice for those looking to streamline their remote control collection and simplify their home entertainment setup. We hope that this guide on “Philips Blu-Ray Universal Remote Codes” has provided you with the codes and instructions you need to successfully program your Philips Blu-Ray Universal Remote and start enjoying the convenience of controlling all of your devices with just one device.

Leave a Comment