Do you want to know how to program a GE remote to control a Sony blu-ray player? This post will tell you everything you need to know about setting up a GE universal remote with a Sony blu-ray player.
You can use a single remote to control multiple devices, operating a seamless entertainment experience. You must have the proper remote codes to program a GE remote. You must have a universal remote to program a universal remote.
After setting up the universal remote, the device will respond to your remote key presses. We’ve provided a list of remote codes for a wide range of remotes here. You must locate a matching code for the blu-ray player and programme your remote control.
GE Universal Remote Codes for Sony Blu Ray player List
If you’re looking for GE Universal Remote Codes for your Sony Blu-ray player, you’ll find them on this list. We’ve compiled a comprehensive collection of codes that will work with all types of Sony Blu-ray players. Whether you have a standard model or a special edition player, these codes should get you up and running in no time.
Sony Blu-ray Disc Player Universal 5 Digit Codes
Sony Blu-ray Disc Player Universal 4 Digit Codes
2484, 1516, 2014, 2020, 2022, 2065, 2103, 2108, 2113, 2162, 2171, 2176, 2189, 2203, 2226, 2238, 2244, 2251, 2257, 2273, 2278, 2296, 2298, 2305, 2306, 2307, 2309, 2313, 2329, 2332, 2338, 2355, 2405, 2406
Sony Blu-ray Disc Player Universal 3 Digit Codes
617, 644, 645, 670, 671, 729, 730, 731, 768
GE Universal Remote Codes For Sony Blu-Ray Player
0707, 0792, 0794, 0800
How to manually program GE universal remote to Sony Blu-ray Player?
There is only one programming process for all versions of the remote. However, different codes are used to program each version.
Make sure that your remote control has fresh batteries, or have replacement batteries ready.
- Hold down the Setup button on the remote control until a RED light appears.
- Press and release the “TV” button
- Next, enter the GE remote codes for Sony Blu-ray Player
- When the code is entered correctly, the RED light will go off.
- Now, point the remote at your Sony Blu-ray Player and try pressing all of its buttons. If you can see that it responds to each button press, then you have paired successfully!
If some of the keys on your GE remote are not working with the TV, it means that you may have partially programmed it.
In such condition, you can re-program the GE remote to work with the Sony Blu-ray Player by using another code from the list. However, it rarely happens. Mostly you will get the remote ready to be work with your Philips TV.
If you have a Sony Blu-ray player and need the GE universal remote codes to control it, we hope this article has been helpful.
Remember, these codes are just a starting point and you may need to experiment with different ones until you find the code that works best for your particular device.
Once you have the code, programming your remote is quick and easy. So get out there and start enjoying your Blu-ray player with your GE universal remote today!