COBY TV’s Universal Remote Codes & Program Instructions

COBY TV’s Universal Remote Codes & Program Instructions

Do you have trouble using your universal remote to control your COBY TV? If this is the case, you are not alone. Programming a universal remote can be a difficult and frustrating process, especially if you lack the necessary codes or instructions.

In this blog post, we will go over how to programme your COBY TV universal remote control in detail. We’ll start by providing you with a list of codes you can use to programme your remote, as well as step-by-step instructions on how to enter them.

We’ll also give you some troubleshooting tips if you run into any problems while programming your remote. By the end of this post, you should have a firm grasp on how to programme your COBY TV universal remote and control your TV and other devices.

Coby Tv 5 Digit Universal Remote Codes

  • 01376
  • 11538
  • 12017
  • 10178
  • 12003
  • 11531
  • 11265
  • 11314

Coby Tv 4 Digit Universal Remote Codes

  • 1538
  • 2017

COBY TV Universal 3 Digit Remote Codes

505, 626, 627, 594, 633, 593, 720, 607, 604, 699, 005, 205, 625, 266, 165, 267, 256, 056, 257, 262

How to Program COBY TV Universal Remote Without Codes

To program your universal remote using the auto search method, follow these steps:

  1. Turn on the Device you want to control with the remote (e.g., TV, DVD player, cable box).
  2. Press and hold the device button (TV, DVD, CBL and OK/SEL) on the remote for 3 seconds, until the LED light turns on. This indicates that the remote is ready to be programmed.
  3. Point the remote at the device and press the “CH+” and “CH-” buttons. The remote should send out on/off signals.
  4. Press the “up” or “down” button repeatedly until the device turns off.
  5. Press the “power” button to verify that the code is correct. The device should turn on. If it does, try changing the channel to make sure the remote is programmed correctly.
  6. Press the Device button again to save the code. The LED light on the device should blink twice to confirm that the code has been stored.

How to Program COBY TV Universal Remote With Manual Method

To program a universal remote using a keycode, follow these steps:

  1. Turn on the device you want to control (e.g., TV, DVD player, cable box).
  2. Press the “TV” button on your Dish Network universal remote.
  3. Press and hold the “Setup” button on the remote until the light flashes. This indicates that the remote is in learning mode.
  4. Enter the keycode for your device, which you can find in the instructions booklet or programming guide.
  5. Point the remote at the device and press and hold the “Power” button.
  6. Release the “Power” button when the screen turns off.

Your device should now be programmed to work with the universal remote control. If it doesn’t work, try repeating the steps with a different code from the reference table. I hope this helps! Let me know if you have any other questions.

How to Program COBY TV Universal Remote With Code Search

To program your universal remote using the code search method, follow these steps:

  1. Turn on the device you want to control (e.g., TV, DVD player, cable box).
  2. Press and hold the “Setup” button on the remote until the light flashes.
  3. Enter the code “9-9-1” using the number buttons on the remote.
  4. Press and hold the “Power” button on the remote, and then press the “Channel Up” button repeatedly until the device turns off.
  5. Release the “Power” button. Your remote should now be programmed and should work for all functions.

This method may take some time, but it is a reliable way to find the correct code for your device. Once you’ve found the correct code, you can use it to program your COBY TV universal remote and control your devices. I hope this helps! Let me know if you have any other questions.

Conclusion:

We have provided a comprehensive guide on how to program your COBY TV universal remote control. We have listed out the codes that you can use to program your remote, as well as the instructions on how to input them. We have also offered some troubleshooting tips in case you run into any issues while programming your remote. The main objective of this post was to provide you with the information and resources you need to easily control your COBY TV and other devices with your universal remote.

As we have discussed, programming your universal remote is an important task that can save you time and hassle in the long run. By taking the time to program your remote correctly, you can avoid the frustration of dealing with multiple remote controls and enjoy the convenience of controlling all of your devices with just one remote.

We hope that this post has been helpful in guiding you through the process of programming your COBY TV universal remote. If you have any further questions or need additional assistance, don’t hesitate to reach out to the manufacturer or a professional for support. With the right resources and a little bit of effort, you can easily program your universal remote and enjoy the benefits of a streamlined and hassle-free home entertainment setup.

Leave a Comment