10 Best 6.5 Component Speakers for Bass

Are you confused about choosing the right speaker for your dream vehicle? Often you end up investing in the wrong audio system leading to an unsatisfactory experience. The beginners are generally confused between component speakers and coaxial speakers. These speakers’ sounds are either high bass or dull or highly stretched, making it difficult to hear the music. Whereas, component speakers gives you higher control over the audio experience and better sound quality. If you think of upgrading your car’s music system, go through the list of these best 6.5 component speakers for bass and choose your vehicle’s right one.

  • RMS Watts: 90
  • Sensitiity: 91
  • Impedance (Ohms): 4
  • Frequency Response: 50 – 20k Hz
Check On Amazon
Rockford Fosgate T1650-S Rockford Fosgate T1650-S Rockford Fosgate T1650-S
  • RMS Watts: 80
  • Sensitiity: 88
  • Impedance (Ohms): 8
  • Frequency Response: 47 – 20k Hz
Check On Amazon
MB Quart ZC1-216 MB Quart ZC1-216 MB Quart ZC1-216
  • RMS Watts: 60
  • Sensitiity: 88
  • Impedance (Ohms): 4
  • Frequency Response:20 – 20k Hz
Check On Amazon
Infinity-Reference- 6520cx Infinity-Reference- 6520cx Infinity-Reference- 6520cx
  • RMS Watts:90
  • Sensitiity:93
  • Impedance (Ohms):3
  • Frequency Response:53 – 21k Hz
Check On Amazon
Kicker 43CSS654 CSS65 Kicker 43CSS654 CSS65 Kicker 43CSS654 CSS65
  • RMS Watts: 100
  • Sensitiity: 90
  • Impedance (Ohms): 4
  • Frequency Response: 35 – 21k Hz
Check On Amazon
Focal PS165F Flax Focal PS165F Flax Focal PS165F Flax
  • RMS Watts: 70
  • Sensitiity: 91.6
  • Impedance (Ohms): 4
  • Frequency Response: 60 – 28k Hz
Check On Amazon
  • RMS Watts: 60
  • Sensitiity: 92
  • Impedance (Ohms): 3
  • Frequency Response:55 – 20k Hz
Check On Amazon
Alpine R-S65C Alpine R-S65C Alpine R-S65C
  • RMS Watts: 100
  • Sensitiity: 88
  • Impedance (Ohms): 4
  • Frequency Response: 65 – 29k Hz
Check On Amazon
Rockford P165SI Rockford P165SI Rockford P165SI
  • RMS Watts: 60
  • Sensitiity: 88
  • Impedance (Ohms): 4
  • Frequency Response: 44 – 20k Hz
Check On Amazon
Rockford R165-S R1 Prime Rockford R165-S R1 Prime Rockford R165-S R1 Prime
  • RMS Watts: 40
  • Sensitiity: 89
  • Impedance (Ohms): 4
  • Frequency Response: 60 – 20k Hz
Check On Amazon
  • RMS Watts: 100
  • Sensitiity: 92
  • Impedance (Ohms): 4
  • Frequency Response: 35Hz-23kHz
Check On Amazon


A reputed company in Israel manufactures morel Maximo. The high-fidelity speakers depict the long-standing fame of Morel. Morel speakers are famous for providing the best quality audio. The Maximo line by Morel provides excellent entry-level comments sound speaker. This speaker contains two crossovers, two woofers, two tweeters, and two mids. 

This speaker is enabled with the highest 180- watt power handling capacity. Both the woofers of the speakers are equipped with ferrite magnets. To provide enhanced bass dynamics and clean linear response, the speakers come with Acudamp cone coating. The 1inch dome tweeters are pre-equipped with EVC technology and neodymium magnets. The set of the speaker comes with an additional installation kit. This high-quality design is the perfect choice for a budget of $100 to $ 200.


  • This speaker from morel produces a warm and crystal-clear sound. 
  • On amplification, these speakers are turned up with a complete blast. 
  • The mids of this Morel Maximo speaker are clean and smooth. 
  • For easy installation, you can easily remove the holders of the tweeters. 


  • The speakers are deficient in attenuation options. 
  • The product requires a vast space.
  • The turning down of tweeters is complicated. For turning down, you have to adjust the treble settings present in the head unit.


The speakers are constructed with carbon fiber for a durable exterior. To blast the music without blowing, it comes with a polypeptide cone with rubber surrounding. Rockford Fosgate is paired with two 6.5” woofers and grills, which provide you the best sound quality. Also, the speaker has a power handling rate of 80 watts. RMS/160 water is equipped with two flex fit frames that utilize frames that utilize adjustment of the speaker’s slight adjustment wherever it is mounted. 


  • Rockford Fosgate T1650 is a lot easier to install and has an excellent build-in quality. 
  • This speaker provides a much louder and clearer sound than most other audio systems. 
  • It provides a high bass effect. (Max up to 160). 
  • The woofers are injection-molded carbon fiber-filled, which provides a superior clear sound quality. 
  • It is Klippel’s verified product, a frame that enables it to provide you the best performance. 


  • The product is very costly. 
  • The woofers are just 6.5’’, which is not appreciable.

#3 MB QUART ZC1-216

MB Quart ZC1-216 is capable of producing a nice and smooth recreation of music. For the reduction of a resonant frequency, its tweeter has nylon surrounded for more high-end music quality. This speaker also has a basket with original German-spec material with nylon. TThespeaker’s Z-lines are made of high-quality military titanium to provide an excellent audio experience for a car audio system. This feature enables long-lasting audio, which makes it an ideal option for buying. 

It’s 6.5” speakers have a power handling rate (RMS) 120 watts per set (60 watts each). It has a nano-ceramic coating for extending the range of speakers. To tune the twitter, this speaker comes with a removable phase lens.


  • It is a very long-lasting product for its build quality. 
  • This speaker has a PA66 composite basket, which provides lightweight and more durability and reduces the flex in the noiseless sound frame. 
  • To provide well-balanced audio, this product comes with ceramic coated tweeters with titanium.


  • This system cannot handle excess power.


The excellent sound upgrade from the original manufacturer’s speaker has been crazed among the customers. In place of paper cones or small magnets, this product has larger fiberglass cones more massive interests. The infinity speakers are well-equipped the plus one version of the woofer cones. This product is edge-driven and showcases the textile Tweeters. The popularity of this product makes it one of the best 6.5 component speakers for bass. The speaker can be conveniently updated by merely using an amplifier.


  • This speaker is the most loved speaker among the buyers because of its cleanest audio with no harsh highs. 
  • This product works perfectly for factory head units. 
  • It sounds much better than any ordinary OEM speakers. We are thus making it distinguished from others. 


  • The crossover of the speaker is comparatively smaller than other speakers. 
  • This speaker is capable of accommodating only a mediocre pitch level. 
  • This system requires extra wires and speaker connectors to make a perfect mount. 
  • This speaker is not capable of replicating the sound of 12-inch woofers.

#5 KICKER 43CSS654 CSS65

Kicker 43CSS654 CSS65 is mostly famous for its toughness and dependable qualities for vehicle speakers. The speakers are explicitly made of top-quality polypropylene cones. The speaker is extremely versatile as the product comes with ribbed and UV treated polypropylene cones. The kicker is priced at affordable rates without any compromise in the quality. This system has polypropylene woofers (two) of 6.5,” which delivers a strong performance for years. 

It also has a ¾” titanium dome tweeter that provides a new dimension to a high-level frequency range with vocal details. The woofers handle up to 100 watts (RMS) and also have a high peak value of 300 watts (Total).also have two passive 2-way crossover networks for a distortion less transmission between woofers and tweeter. 


  • The sound quality of the system is crisp and crystal clear. 
  • If you use it with right and good amplifiers, it will provide a top-notch music experience. 
  • Good transient response. 
  • It also has a smooth roll-off of 12DB/octave. 


  • The installation process of the speaker is quite complicated and needs a professional installer for the procedure. 
  • The speaker is made of cheaper quality materials that reduce the durability of the product.

#6 Focal PS165F Flax 

This can be the right speaker for you to experience the top-quality audio even while driving with windows down. You can quickly crank up the tunes to the maximum desired level. You are assured of getting 100% neutral and transparent sounds. The entire set of the speaker features two mid-bass parts with two versions of tweeters and crossovers. 

The RMS rating of this 6.5 component speaker has an input capacity of 70 watts, yet this product can take in more power as well. This speaker can work pretty amazing even at a 100W power supply. The speakers have dome tweeters magnesium/aluminum style. This product has a separate crossover of 12-12db/oct and an adjustable tweeter of 0-3dB/oct. Tune the amplifier to perfection to get the excellent results of these speakers. 


  • This 6.5 component speaker is great for making fantastic mid-bass. 
  • The product is assembled well to avoid the mess. 
  • Along with beautiful imaging, the speakers produce the crispest sounds. 


  • The installation procedure is quite tricky and needs a professional for installation. 
  • The crossover wires provided with the product are extremely short.

#7 JBL CLUB6500C 

If you are looking for a reasonably priced speaker for your car, this 6.5 component speaker is ideal. This speaker from JBL can operate at a comparatively lower range of ohm, making it possible to power them with OEM radio. Although this product is not meant for high-fidelity enthusiasts, yet it can be great for a few people who love listening to popular tunes. Overall, you can expect good mid-bass with relatively warm sound and clear vocals. 

This product comes with two tweeters, two woofers, and all other necessary installation components such as screws, mounting brackets, etc. To avoid any kind of wiring problem, it is advisable to check all the adaptors and speaker-wires beforehand. For a true audiophile, the sound might seem to be very powerful of its own. It takes about to “break-in” the bass. It is recommended to purchase a larger than 8″ and an additional amplifier to get the perfect audio. 


  • This 6.5 component speaker includes a tiny crossover. 
  • The tweeters of this product are very bright. 
  • The speaker provides a smooth and precise sound, paying attention to the sound details. 


  • The installation screws provided with the product are of cheaper quality. 
  • It is recommended to buy strong screws separately to secure the speaker. 
  • The mid-bass produced by the speaker is very weak.


Alpine R-Series is famous for its successful series for premium music experience. Alpine is a trusted brand for speakers, and often Mercedes and BMW factories have Alpine speakers. These speakers have two hybrid multilayer fiber woofers to deliver a strong bass sound in a car. The woofer cones are very flexible for car doors and guarantee a very long life. 

Its 1’ tweeter enhances the melody of the music to another level. The woofers can handle up to 100 watts (RMS) and 300 watts (PEAK) for better dynamic music. 


  • This 6.5 component speaker provides Easy installation 
  • It is very long durable for its top-notch materials. 
  • The speaker provides excellent bass and clear midrange. 
  • The audio quality of the speaker is significantly Distortion less. 
  • For an increase in efficiency, Alpine speaker uses a new ring-type tweeter voice coil. 


  • Audiophiles should connect an equalizer system to control the brassy mid-range sound. 
  • This product needs a robust amplifier for the best experience.


The product is top-rated due to its hidden crossover. With its high dynamic range, you get louder music with a little volume up. If you don’t prefer high-bass music, you don’t even need an amplifier. But the internal crossover sometimes dims as it is supposed to perform with an additional subwoofer and amplifier. 


  • Easy to install comparatively smaller compared to other Rockford models. 


  • For a strong bass, the speaker needs an extra amplifier. 
  • The tweeter’s mounting set of this product is difficult to install.


The Prime series speakers are famous for its enormous sound quality and next-gen technology. The Mylar-balanced dome tweeters are designed to provide a clear and crisp sound with all instruments. This 6.5 component speaker is capable of delivering good audio to the average listeners without any amplifier. This product comes with two woofers and two tweeters with grills. 

You also get the components you need for surfaces mounting of your vehicle. The speaker has built-in crossovers, so you do not need to buy unless you are picky about differentiating the low to a higher frequency. It offers a 6 dB/octave high-pass crossover in each tweeter, delivering excellent music quality. 


  • Crisp and clear sound experience according to price. 
  • The speaker is bright with midrange sounds. 


  • Even with an additional amplifier, the overall bass lacks.

#11 POLK AUDIO DB6501 

Polka audio, the manufacturer of the speaker, has a considerable reputation in the audio industry. With more than 40 years of being an expert in sound technology, Polk audio can bring out high-end solutions for your speakers. To easily fit the speaker in every application, this speaker comes with an adapter ring.

To protect the electronic circuit, the speaker is supported by a two-way Butterworth outboard crossover. The set of this speaker consists of two woofers, crossovers, and tweeters. The woofers of the speaker are made of mica or polymer. 


  • It is capable of handling 300-watt peak power efficiently. 
  • The best part is it comes with a one- year guarantee.
  • The speaker has an impedance of 4 ohms and a frequency response of 23 Hz to 35 Hz 


  • The speaker is expensive.
  • The mounting process of the product is often complicated.

Leave a Comment